u-line refrigerator repair

With summer approaching, it's time to start thinking about conditioning system in our car, air, and if it works properly. One of the most common problems with an AC / is the location of coolant leaks from them. Finding the source of the leak can be a long and tedious. The freon gas leak literally could come from any part of the piping system for a battery of small pressure switch gone bad. The EPA has much stricter standards for the treatment of leakage refrigerant. The day ended, air conditioning with a few cans of R12 and truly over. Now, even small leaks must be found and corrected. Here technology for rescue. Several methods Repair air conditioning use to locate and repair leaks of refrigerant. Each method has its advantages and disadvantages and their use depends on the situation. The three most commonly used is an electronic refrigerant leak detector, UV Dye leak detection kit, ultrasound units and leak detector.

The electronic detectors refrigerant leak

The electronic leak detector for refrigerants are the most faster and easier to use three methods. Above all, you have no idea where the coolant leak and possible areas should be restricted. An electronic system refrigerant leak detector can be very near the location of the flight and from there you can get more specific. Some of the best models crank the sensitivity of times that gets the measured area. For very small leaks, you can include the suspicious area in film or cloth to try to contain the coolant. When you unfold the region on refrigerant leak detector and see if you get a reading. Remember, the refrigerant is heavier than air and which flows into the ground. It is better to sniff below the tubes and compartments of the beholder.

Ultrasonic Leak Detectors

It is the state of leak detectors and art have a new tool to look for coolant leaks. They operate on the principle of sound detection. Instead of smelling the refrigerant gas to hear the sound that makes the exhaust system of freon. To use a leak detector ultrasonic system should be the pressure of the refrigerant to escape and make noise. In addition, the work area must be totally silent. Remember you are looking for sound without background noise is essential. This is the main drawback by using an ultrasonic leak detector. Few auto shops are sufficiently silent as to use it effectively.

Ultraviolet Leak Detector Dye

The third method of ultraviolet dye is injected into the air conditioning system and, in theory, should escape with the refrigerant. Typically, service stations have a leak detection kit ultraviolet radiation have all the tools necessary to carry out this task. Usually these kits come with an ultraviolet lamp or flashlight ultra-violet dye injector, eye safety and UV ink. This method is the most technically complex of the three is the dirtiest. You should inject the UV dye in the system and wait to escape. The coloring can be messy and get all the senses. Puts you in an air-conditioning, telephone meters and you drain coolant. But once you shine your flashlight ultra-violet and check for leaks, usually you can see exactly where it is.

Each method has its pros and cons. For beginners, I recommend an electronic refrigerant leak detector and professional auto shop would be better served with a kit for detecting ultra-violet leak.

About the Author:

Jason has been in the construction equipment and industrial sales business for over 10 years. He owns and operates Red Hill Supply to better serve the automotive and industrial industries. –
Automotive Tools
.

Article Source: ArticlesBase.com – Refrigerant Leak Detector And Finding Leaks In Your Air Conditioner

Orange County Appliance Repair | Newport Beach | San Diego